Hansin HS3060 aerial platform
Overall dimensions , L x W x H, mm - 7 395 x 2 180 x 3 135
Attached equipment weight - 5 480 kg
Gross weight - 8 175 kg
Renting a 30 m aerial platform is easy! Click on the "Submit Application" button or call us!
Hansin HS3060 aerial platform on the Hyundai Mighty chassis.
Power and endurance are provided by a diesel engine with a turbocharger and an intercooler, a maximum power of 140 hp. Wheel formula 4 x 2 (with a rear driving axle).
Maneuverability: minimum turning radius 7.3 m.
Safety - drum braking system on all wheels with hydraulic control and vacuum servo booster, dual circuit.
Aerial platform boom:
- 6-section telescopic octagonal shape;
- Simultaneous extension type;
- Made of high strength DOMEX structural steel;
- Control: remote, from the operator's cab, lower lever control on the platform.
Outriggers
- Stem width: front 5950 mm, rear 6150 mm
- Type: front and rear X-shaped, hydraulic
- Material: High strength structural steel
- Controls: lower platform linkage controls on the left and right.
Working platform
- Size: 3,000 x 1,100 mm
- Rotation angle: rotates left and right 360 degrees
Equipment
- Operator's cab: closed type with air heater and fuel supply regulator.
- Control levers: boom sections, platform and platform swing, cargo winch.
- Spare parts
- Remote control, walkie-talkie.
- Electric oil cooler.
- Outrigger and platform lights.
Safety devices
- Automatic limitation of workflows when overloaded.
- System for automatic determination of the horizontal plane of the working platform and protection of the boom from impact with the object.
- An electric motor and an additional hydraulic pump for folding the aerial platform in the event of a failure of the main engine of the vehicle.
- Digital Anemometer - Allows wind speed to be displayed on the operator's cab display. The alarm is triggered if the wind speed exceeds the permissible limits.
- Sensors: rollover warning, boom position safety, weight load, boom position control, rollover warning, overshoot.
- Keys: emergency stop of work, emergency folding of boom sections.
The Hansin HS 3060 aerial platform has a number of improvements and changes in comparison with other aerial platforms:
- The reliability of the sections increased, the outer cylinder was removed, which ensured the synchronous extension of the sections. In the construction of the boom, the cable has been replaced with chains from the 1st to the 3rd section.
- There were changes in the electrical system of the installation, it was equipped with software, microcircuits, fuses, and a monitor.
- The operator's cabin has been updated.
- The aerial platform is equipped with three hydraulic locks - one for each cylinder and an additional central hydraulic lock
- The steel is completely replaceable with domex high-strength steel. New technology of varnish-and-paint coating.
- Maximum safety is ensured by digital information of the load being lifted under the cradle, fittings protect the basket from lagging in the level, and a special system prevents the cradle from overturning.
- In the model, twisting of the main highways is excluded, the subframe is reinforced, the length of the outriggers is installed.
More photos and videos with a description of the work can be viewed here: OUR WORKS
